Tutorial on the use of the laser marking feeder

Laser marking feeder is a device used for marking or engraving on the surface of a material. It usually consists of a high-power laser and a set of mechanical devices that can be used to cut, carve, and punch holes. Here are some brief guides on how to use laser marking feeders:

1. Preparation: Before use, make sure all necessary tools and accessories are ready and on hand. This includes power cords, battery packs, laser heads, feeding mechanisms, and any auxiliary tools that need to be used (e.g. cleaners, lubricants, etc.).

2. Turn on the power: Connect the laser marking feeder to the power socket and ensure that the plug is inserted in the correct position. Press the power switch and wait for the machine to warm up and enter the standby state.

3. Select the operation mode: Choose according to the need, generally divided into cutting, engraving and punching three modes. Under different modes, the output power of the laser head is different, and the corresponding processing effect is different. For example, for the cutting mode, a higher power can be selected to cut the object quickly; For the engraving mode, a lower power can be selected for a fine effect.

4. Fix the material: Place the material to be processed on the work table and ensure that it is stable and will not move. Clamps or other fixation methods can be used to maintain the stability of the material. If the materials are large or difficult to fix, they can be cut into smaller pieces before processing.

5. Start processing: press the start button, and the laser head begins to scan the surface of the material. Operations such as cutting, engraving or drilling can be performed on the surface of the material as required. Pay attention to observe the working condition of the laser head and adjust the parameters in time to achieve the best effect.

6. Stop processing: When the required operation is completed, press the stop button and the laser head will automatically close. At the same time, the movement of the feeding mechanism will stop. At this point, the material can be removed and processed.

7. Pay attention to safety matters: when performing laser processing, be sure to wear protective equipment such as protective glasses and gloves to prevent possible burns. In addition, be careful not to let the laser beam directly shine on the eyes or skin, so as not to cause injury.

In short, the use of laser marking feeder is very simple, only need to follow the above steps to complete a variety of processing tasks. But pay attention to safe operation to avoid unnecessary risks.